Size guide — how vintage tees fit
The tag size is a hint. The measurements are the truth. Every shirt on the rack has its own page with its exact size, pit-to-pit and length — those exact numbers always win over any chart on this page.
The tag size is a hint, the measurements are the truth
Vintage sizing runs small compared to modern tees — a vintage L is often closer to a modern M across the chest, and cuts varied a lot from brand to brand and decade to decade. That is why every shirt's own page lists its size plus its pit-to-pit and length measurements. Check those numbers before you buy; they are what the shirt actually is, and they always beat the tag, the chart below, and any guess.
How we measure
Every shirt is laid flat on a table and measured in inches, laid flat — not worn, not stretched.
Pit-to-pit: armpit seam to armpit seam, straight across the chest. This is the number that decides whether a shirt fits you across the chest.
Length: from the top of the shoulder (the highest point, where the shoulder seam meets the collar) straight down to the bottom hem.
Measurements are taken flat and can vary by about half an inch (0.5") either way, depending on how the shirt sits. Some shirt pages say “approx.” next to the numbers — those were measured the same way, we just want you to know they are rounded.
Check your fit in 2 minutes
1. Take a shirt you already own and like the fit of. Lay it flat on a table, smooth it out, don't stretch it.
2. Measure it the same way we do: armpit seam to armpit seam for pit-to-pit, top of the shoulder to the bottom hem for length.
3. Compare your numbers to the shirt's numbers on its page. If they match within about half an inch, it will fit you the same way. If the shirt's pit-to-pit is an inch or more smaller than yours, it will feel tight across the chest — no matter what the tag size says.
Approximate size chart — from the shirts actually on the rack
This chart is approximate, and it comes from the 15 shirts on the rack right now — not from a generic sizing chart. Vintage cuts vary so much that sizes overlap. The shirt's own measurements on its page always override this chart.
| Size | Pit-to-pit | Length | What it's based on |
|---|---|---|---|
| M | 20–21 in | 26–28 in | 2 shirts in M |
| L | 20–22 in | 27–30 in | 7 shirts in L |
| XL | 22–24 in | 28–31 in | 5 shirts in XL |
| 2XL | 24–25 in | 29–30 in | 1 shirt — AC/DC Back In Black tee |
There are no size S shirts on the rack right now — the rack runs M to 2XL.
Notice the overlap: the biggest L on the rack (22 in) is the same width as the smallest XL (22 in). That is normal for vintage — two shirts with the same tag size can measure differently. Again: the shirt's own page wins.
Between sizes? Fit notes
Go by pit-to-pit first. That is the number that decides whether a shirt fits across your chest. Length is easier to live with — a slightly long tee still works, a too-narrow one doesn't.
Vintage tees are often boxier and shorter than modern ones. A vintage L can be wider and shorter than a modern L, or narrower and longer — it depends on the brand and the decade. Don't assume; measure.
Washed and pre-shrunk already. Every shirt is washed before it is listed, so what you measure is what you get — it won't shrink down a size in your first wash the way a brand-new tee can.
No size swaps — so measure first
Every shirt is 1-of-1: there is exactly one of each, in one size, and no other size exists to swap into. If a shirt doesn't fit, we can't exchange it for a different size — see our Returns Policy. That is the whole reason this page exists: two minutes with a tape measure now saves a shirt that doesn't fit later. Still unsure? Contact us or check the FAQ — tell us the shirt and your own shirt's measurements and we'll give you an honest read.